Florida homeowners know that power outages are more than a minor inconvenience. From hurricane-related blackouts to unexpected utility failures, having a backup power system can make all the difference in safety, comfort, and peace of mind.
But what’s the right choice for your home—a portable generator or a standby generator?
Let’s break down the real-world pros, cons, contractor requirements, and Florida-specific considerations so you can choose confidently.
Portable generators are compact, movable units typically powered by gasoline or propane. Though they seem simple, safe home use requires professional electrical work, including an inlet and manual transfer system.
Power Output: 3–15+ kW
Use Case: Short outages, powering essentials
Fuel: Gasoline or propane (stored on-site)
Standby generators are permanent fixtures wired directly to your electrical system. They power your home automatically during an outage and run on propane or natural gas from your utility or a tank.
Power Output: 10–26 kW
Use Case: Long-term outages, full-home or partial backup
Fuel: Natural gas or propane (hard-piped)
| Requirement | 🔵 Portable Generator | 🟢 Standby Generator |
|---|---|---|
| Electrical Contractor | ✅ Required – Install inlet box & transfer switch | ✅ Required – Connect generator to the home's electrical panel |
| Gas Contractor (LP/Natural) | ❌ Not usually needed (fuel is portable) | ✅ Required – Connect to natural gas utility or propane tank |
| HVAC Technician | ⚠️ Sometimes required if adding a soft-start system for A/C | ✅ Recommended when HVAC equipment is included in backup power |
| Structural Contractor | ❌ Not required | ⚠️ May be required for concrete pad or equipment platform |
| Permits Required | ⚠️ Almost always required | ✅ Always required (electrical, gas & possible zoning permits) |
| HOA Approval | ❌ Usually not required | ⚠️ Often required, especially in deed-restricted communities |
| Feature | 🔵 Portable Generator | 🟢 Standby Generator |
|---|---|---|
| Initial Cost | $700–$2,000+ for the generator $800–$1,500+ for professional installation |
$5,000–$20,000+ Installed & permitted |
| Power Output | 3–15 kW Runs refrigerators, lights, electronics and some A/C systems (depending on size) |
10–26 kW Can power the entire home including HVAC systems |
| Startup | Manual start (electric start available on many models) | Fully automatic within seconds of an outage |
| Fuel Source | Gasoline or propane (manual refueling required) | Natural gas utility or large propane tank |
| Noise Level | Inverter models are quieter. Larger units can be louder. | Quieter with insulated weather-resistant enclosure |
| Installation | Professional installation of transfer switch & inlet box recommended | Professional installation with gas hookup, automatic transfer switch and concrete pad |
| Permits Required | Electrical permit typically required | “Electrical, gas, may be additional required Note: HOA approval may be required” |
| Mobility | ✅ Portable (many larger models include wheels) | ❌ Permanently installed |
| Maintenance | Owner maintenance (oil changes, spark plugs, seasonal testing) | Professional maintenance recommended every 6–12 months |
| Best For | Occasional outages and homeowners wanting a lower upfront investment. | Frequent outages and homeowners wanting automatic whole-home protection. |
Even though they’re portable, using a generator to safely power your home circuits requires:
Total installed cost: $2,000–$5,000+ including generator, depending on complexity and local labor rates.
Standby generator projects in Florida require:
Example: Some HOAs limit generator noise to <70 dB and require that the unit be screened with landscaping or fencing.
Total installed cost: $5.000–$20,000+ including generator, depending on complexity and local labor rates.
While "portable" sounds convenient, these units can still be heavy:
Pro Tip: Look for models with wheels, fold-down handles, and electric start to make operation easier. Storing the generator and moving it into position can be a chore, especially during a storm.
Here’s a rough power breakdown to help you size your system:
| Appliance | Typical Running Wattage |
|---|---|
| Refrigerator | 600–800 W |
| Window A/C Unit | 1,000–1,500 W |
| Central A/C (3-ton) | 3,500–4,500 W |
| Electric Water Heater | 3,000–4,500 W |
| Wi-Fi + Lights | 500–1,000 W |
Portable: Good for 1–2 appliances + the basics + A/C when used in conjunction with a soft start system
Standby: Can run the whole home, including HVAC, water heater, washer/dryer, etc.
You may also be interested in: How to Choose the Right Sized Generator
You may also be interested in: Can a Portable Generator Run My A/C?
If you’re looking for affordability and flexibility, a portable generator (properly installed) could be a great fit—just be ready to manage fuel, setup, and storage.
If you want hands-off operation, full-home coverage, and peace of mind during long outages, a standby generator is the gold standard—especially in storm-prone areas like Florida.
Either way, partner with licensed professionals and check local codes and HOA rules to avoid costly surprises.